Trucks & Accessories

Genuine Eder Flagpole Trucks & Accessories, Made in the USA

The truck is the fitting at the top of your flagpole that holds the pulley your halyard runs through. We carry the complete Eder line of replacement trucks for residential, commercial and municipal flagpoles, plus caps, adapters, top plugs and replacement pulleys. Prices shown are starting prices; available colors and sizes are listed on each item.

How to Choose the Right Truck

• External or internal halyard? If your rope or cable runs on the outside of the pole, you need an external halyard truck. If it runs inside the pole and is reached through an access door, you need an internal halyard truck (rope style or cable style).
• Cap style or threaded? Cap-style trucks slip over the top of the pole and are held with set screws. Threaded trucks screw into a 1-1/4" or 1-1/2" NPT fitting in the pole top. No fitting? Add a Pole Top Adapter.
• Stationary or revolving? Revolving trucks turn on ball bearings so the flag follows the wind and wraps less.
• Single or double pulley? Choose double pulley to fly two flags on separate halyards.
• Measure first. Measure the outside diameter at the very top of your pole before ordering.

External Halyard Trucks: Cap Style

• Eder OT Truck: stationary, single pulley, poles 1-7/8" to 3-1/2", from $46.00
• Eder ST-1 Truck: stationary, single pulley, poles 1-3/8" to 2", from $50.00
• Eder ST-32 Truck: stationary, double pulley, poles 1-7/8" and 2-3/8", from $101.00
• Eder RTC-1 Truck: revolving, single pulley, poles 1-3/8" to 2-3/8", from $174.00
• Eder RTC-2 Truck: revolving, double pulley, poles 1-3/8" to 2-3/8", from $174.00

External Halyard Trucks: Threaded, Revolving

• Eder RTS-1 Truck: single pulley, poles up to 3-1/2", from $142.00
• Eder RTS-2 Truck: double pulley, poles up to 3-1/2", $155.00
• Eder RTA-1 Truck: single aluminum pulley, poles up to 3-1/2", $160.00
• Eder 150 Series Truck: double pulley, 1-1/2" NPT, poles up to 4", $261.00
• Eder HDT-1 Heavy-Duty Truck: single pulley, poles up to 6", from $352.00
• Eder HDT-2 Heavy-Duty Truck: double pulley, poles up to 6", $445.00
• Eder Extra Heavy-Duty Truck: double pulley, poles up to 12-3/4", from $1,380.00

Internal Halyard Trucks

• Eder IH-1 Truck: rope style, cap style, fits 3-1/2" pole, $156.00
• Eder IHT-VS Truck: rope style, threaded, poles up to 3-1/2", $162.00
• Eder IH-2 Truck: cable style, threaded, revolving, pole tops 3" to 7-1/2", from $413.00

Caps, Adapters & Top Plugs

• Eder Flagpole Cap: cast aluminum, fits 2" and 2-1/2" poles, from $39.00
• Eder Threaded Top Plug: 1-1/4" NPT, $54.00
• Eder Pole Top Adapter: mounts a threaded truck on poles 2-3/8" to 6", from $99.00

Pulleys

• Eder Replacement Rope Pulleys: nylon and aluminum, 8 sizes, from $6.30
• Eder Pulley & Eyebolt Assembly: standard and deluxe, from $10.80
• Eder Vertical Mount Pulley Assembly: $50.50